Installing ASUS Z53F laptop #
English Translation in progress.......
What's in the box ?#
De laptop is shipped with Vista, the hard disk has 3 partitions:- Recovery (Vista ?) 5 GB
- Windows Vista 68 GB
- DATA 40 GB
It has a nice Ultrabright 1200x800 screen, Intel chipset, Intel Core Duo T2350 processor (no Virtualizaton :-( ) .
First the Windows shit.#
During the first boot, the Vista installation has to be finished, things like timezone , keyboard, language etc....Then it takes a veeeeeery long time to login for the first time (with an account created in the previous step). If you're finally logon to Vista, McAfee starts nagging, you have to go through a dialog, and after that's finished, it again takes a veeeeery long time before McAfee installation is fineshed
Shutting down Vista also takes a long time.
Linux install#
We start with the installation of Ubuntu Feisty Fawn (7.04) from the Live-CD.
Sound works, wireless lan Intel Pro Wireless 3945abg is recognized (but, later more...). The screen only offers resolution 1024x768, and is not very sharp.
Then first with gparted, the last DATA partition divided in 3 parts, Linux Root 1, Linux Root 2, swap (1G).
Then the Ubuntu install started. This works smoothless (as excpected).
The GRUB menu now shows 2 additional options beside Ubuntu, 2 (twee) Vista boot options. I just choose the first one, but I get a lot of error messages and on the next reboot, GRUB even doesn't start anymore ?!
Rebooted from Ubuntu Live-Cd, start gparted and then it appaers that the 3 linux paritions are completely gone !!
Recreated the 3 partitions again and again installed Ubuntu. Boot again, and now choose the second GRUB option, now Vista boots normally.
THe rebooted, and choose the Ubuntu option in GRUB, works fine .
So the first thing I did was edit /boot/grub/menu.lst and commented out the "fatal" first option.
Now we have a basic Ubuntu system, let's start the customization.
Ubuntu customization #
Screen #
As mentioned earlier you don't get out-of-the-box geen 1280x800 resolution, it really looks awfull. I first started to play a little with xorg.conf, but that didn't help (I'm an not a X goeroe). The changes didn't give me a better resolution. So Googling.... There I found the package 915 resolution, (which appaered to part of the standard Ubuntu distribution) :915resolution is a tool to modify the video BIOS of the 800 and 900 series Intel graphics chipsets. This includes the 830, 845G, 855G, and 865G chipsets, as well as 915G, 915GM, 945G, 946GZ, G965, and Q965 chipsets. This modification is neccessary to allow the display of certain graphics resolutions for an Xorg or XFree86 graphics server.
Installed this, and also made it start at boot time by editing /etc/init.d/bootmisc.sh
# # setup the Intel graphics card (replace entry 38) : 915resolution 38 1280 800 > /tmp/915res.stdo 2>/tmp/915res.stde 915resolution 3a 1280 1024 >> /tmp/915res.stdo 2>>/tmp/915res.stdeBooting, and voila a magnificent sharp 1280x800 screen.
Solved
Wireless Card#
The wireless card is a:metskem@asus:~$ lspci|grep ireless 02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
Well, in Ubuntu Feisty there is a native driver shipped for this card, the card is also properly recognized :
metskem@asus:~$ sudo iwconfig
Password:
lo no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11b ESSID:"DirtyHarryWifiNet"
Mode:Managed Frequency:2.462 GHz Access Point: 00:04:E2:A3:AC:F8
Bit Rate:11 Mb/s Tx-Power:15 dBm
Retry limit:15 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=95/100 Signal level=-33 dBm Noise level=-34 dBm
Rx invalid nwid:0 Rx invalid crypt:550 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:23968 Missed beacon:0
But the bandwith is very poor, not more than 20 KB/s, while Vista on the same laptop runs op to the max. I have (250 KB/s).
Googling again, and more people seem to have these symptoms. It has something to do with b en g routers, and since I still have a 802.11b (11 Mb/s) router ....., I tried my laptop/wireless card with a modem of my brother in las 802.11g (54 Mb/s) modem, and yep, there it works fine.
So I bought myself another 802.11 g modem, and this problem is circumvented.
CPU Frequency scaling#
First, a kernel module has to be loaded:sudo modprobe acpi-cpufreq
If you have done that, you can tweak with it like :
echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor echo ondemand > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governorYou can replace powersave with ondemand or performance . On the taskbar you can add a CPU frequency meter (2 x, for each CPU 1). There you can nicely see the frequency changing from for instance 1.8 GHz to 798 MHz. You can also use this to see the voltage history and charge history and also the power consumption, which varies from
Om het geheel een boot te laten overleven, het volgende toegevoegd aan /etc/init.d/bootmisc.sh :
# # insert the cpufreq kernel module: modprobe acpi-cpufreq
Webcam#
De volgende zit erin (eerste regel) :metskem@asus:~$ lsusb Bus 005 Device 003: ID 05e1:0501 Syntek Semiconductor Co., Ltd Bus 005 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 001 Device 005: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse Bus 001 Device 001: ID 0000:0000Na enig Googlen stuit ik op een sourceforge site
speciaal voor ontwikkeling van een webcam driver voor linux voor deze Syntek webcams :-)
Welnu, daarvandaan gedownload de stk11xx-1.0.0.tar.gz en :
- uitgepakt
- make clean
- make
- sudo modprobe videodev
- sudo insmod stk11xx.ko
Om het geheel een boot te laten overleven, het volgende toegevoegd aan /etc/init.d/bootmisc.sh :
# # make arrangements for the Syntek webcam: modprobe videodev insmod /usr/local/stk11xx-1.0.0/stk11xx.ko
SD card reader#
Dat ding zit er ook nog in, ff een SD card ingestopt, en doetut gewoon goed.Installatie van diverse pakketten#
De volgende packages zijn op de gebruikelijke Ubuntu wijze geinstalleerd:
- Automatix, met vervolgens daarmee weer alle codecs/mp3 je kent het wel, flash, realplayer, het hele zwikje
- Eclipse
- Bluefish editor
- scite editor
- wifi-radar
- exaile media player
- VLC media player
- gnomad2 voor de Zen MP3 spelers
- aMSN
- wireshark network analyzer
- FrostWire search engine for the Gnutella network
- Citrix ICAClient (met daarbij dit ook nog )
Vragen#
Mail dan even : harry.metske@gmail.com
